How To Fix Flashing White Light On Ps4 Controller

The PS4 controller has its total share of problems. From not being able to connect to the console to disconnecting intermediately, there have been many ups and downs in the controller's history. One of the most annoying bug is where the PS4 controller goes into an unresponsive state and flashes white color.

This phenomenon occurs rather commonly and there are simple ways to fix this upshot. It usually occurs when either the battery of the controller is depression or when the controller is unable to connect to the console because of unknown reasons. Start with the kickoff solution and work your way downward appropriately.

Solution 1: Resetting your Controller

PS4 controllers have a small reset button present at their backs. Y'all need a small pivot to insert into the hole and press the push button. This is to make certain that no one accidentally resets the controller. There are ordered steps which you accept to follow to reset the controller completely and then you can connect.

Take a small pin and printing the reset button on your controller for iii seconds. Your PS4 should be turned on and the white calorie-free should exist blinking when you do this.

In one case yous have reset the controller, plow your PS4 off completely. Expect for ii-3 minutes.
Turn your PS4 back on and try connecting the controller to the console. Check if you can use it properly.

Solution two: Using Micro USB Cables

Along with connecting your PS4 controller wirelessly, you lot tin also use a Micro USB cable. The Micro USB cablevision can exist used to establish a connexion initially and when the connection has been established, you tin easily switch dorsum to Bluetooth. Hither we will try to power cycle your controller so if there are any incorrect configurations, they get reset besides.

Ability down your PS4 device from the front of the panel and put it in slumber mode.
One time all the lights from the panel disappear, unplug the ability cablevision from the outlet.
Now printing the power push button on the PS4 for 30 seconds to make sure all the power is drained.
At present connect the controller to the PS4 with a micro USB cable. Burn up the console and printing any button. Hopefully, the controller will be detected and work as expected.

If the latter doesn't piece of work with your current USB cable, yous should try changing the USB cable. Many smartphones nowadays have a micro USB cable for the connection. Yous tin endeavor plugging them in and see if this does the trick.

Solution 3: Using a 2d controller

Another workaround which works for many people is using the second controller. Nosotros will use the second controller to make some changes in the settings and and so effort to connect the original controller which is blinking white. If y'all do non take another controller, yous tin can borrow it from your friend because this solution won't piece of work without it.

Connect the second controller to the panel properly and make sure information technology is working. Now use the 2d controller to go to Settings > Devices > Bluetooth Devices. Now make sure that only the working controller is present in this window.

At present on the controller which isn't working, press the Share push for five seconds or and so. Also, press the PS button at the same time until you see the light bar flash twice every second or and so.
After following both steps, you volition now see both controllers (Working: Greenlight, Continued; Not-working: No green light).
At present using the working controller, select the non-working controller and it will attempt to pair with the device (it will show 'Please look').
You will exist asked to connect to the new device. Printing Yeah and you will be washed.

Solution 4: Pressing PS4 and Share Push

There is some other workaround which we can try earlier moving on to booting the organisation in Prophylactic Fashion. This workaround emerged subsequently users carried out test and trial and were shared beyond the net community. Follow the steps below.

Printing and concur the PS and share push button at the same time

Proceed pressing both the buttons until your Play Station iv turns on.
One time the PS4 turns on, check if all the controls are working and if the console is responding to each control past the controller.

Solution 5: Using Safe Way

Safety Mode is present in almost every console or computer to enable the user to perform advanced diagnostics and assistance in upgrading firmware, resetting databases etc. Since y'all cannot use the Play Station because your controller isn't working, you can enable Safe Mode and attempt some of the following fixes listed beneath.

Here are the steps to enter into safe mode:

Press the Power Button present on the front panel of the PS4 to turn information technology off. The indicator will blink a few times.
Later turning off your PS4, printing and hold the Ability Push and keep holding it until you hear 2 beeps. The first beep will usually be heard when you press it initially and the second beep when you go along pressing it (for effectually 7 seconds).
Now connect the PS4 controller with a USB cable and press the Play Station button nowadays on the controller. You are now successfully in Condom Manner.
Once you are in prophylactic mode, select the 5^thursday option "Rebuild Database". This selection will scan your unabridged drive and effectively create a new database of the content. Wait until the process is complete (it may take some time depending on the amount of data).

Note: This choice may erase all your data and configurations on your Play Station four. Call back to save your data correctly before you lot proceed with this solution.

If rebuilding the database doesn't help, you can proceed and update your system software. Information technology is possible that at that place is an update available for the software by Sony which fixes any bugs or bug which you might be experiencing. Merely select the iii^rd selection after booting to safety mode.